HPE Aruba Networking CX 6100 48G 4SFP+ Switch

The HPE Aruba Networking CX 6100 Switch Series offers gigabit connectivity with high-speed uplinks and optional PoE to provide entry-level, reliable, and convenient wired access connectivity for enterprise branch office and SMB networks.
The switch series delivers a simple, consistent operator experience with the HPE Aruba Networking CX Switch Operating System (AOS-CX) used across HPE Aruba Networking CX switching platforms.
It has fully-managed enterprise-class switches deliver Layer 2 capabilities with support for static routing, access control lists (ACLs), robust quality of service (QoS), traffic prioritization, sFlow, and IPv6.
The CX 6100 series provides right-size deployment with choice of 12, 24, and 48-port 1U models with convenient built-in 1/10GbE uplinks and up to 740W of Class 4 PoE.
It simplifies ownership with no switch software licensing or subscriptions required.

AI-ready performance and power

The HPE Aruba Networking CX 6100 Switch Series is designed with a dedicated ASIC that delivers very low latency, increased packet buffering, and adaptive power consumption needed for AI, Wi-Fi 7, and Internet of Things (IoT) requirements.
It has up to 740W IEEE 802.3at Class 4 PoE with up to 30W per port supports newer Wi-Fi 7 and PoE devices.
The four built-in wire speed 1/10GbE uplinks mitigate bottlenecks at the access layer where users and devices connect.

Simplified configuration and management

The HPE Aruba Networking CX 6100 Switch Series provides flexibility to manage and simplify configurations with HPE Aruba Networking Central, HPE Aruba Networking Switch Multi-Edit Software, easy-to-use web GUI, or industry-standard CLI.
HPE Aruba Networking Switch Multi-Edit Software introduces automation that allows for rapid network-wide changes and verifies policy conformance post network updates.
The switch series offers unified management across wired, wireless, and WAN using HPE Aruba Networking Central.
It reduces manual IT operation tasks around initial deployment or on-going configuration changes to accommodate adds, moves, and changes with colorless ports using local user roles and local MAC authentication (LMA).
The CX 6100 series is ready for software-defined networking with REST APIs for fine-grained programmability of network tasks.

It offers virtual switching framework (VSF) stacking - Scale and simplicity

It support for up to eight switches (or members) in a stack through chain or ring topology.
It offers the flexibility to create stacks that span longer distances such as hundreds of meters across campuses to kilometers between sites.
It has the flexibility to mix 24 and 48-port modular and fixed CX 6100 models.
It has a simplified configuration and management as the switches act as a single chassis when stacked.

Description

The HPE Aruba Networking CX 6100 Switch Series is a modern family of entry level access switches ideal for branch offices, mid-market enterprise, and SMB networks. Designed for reliable, simple, and secure access, this switch family provides a convenient wired access solution for enterprise networks supporting IoT, mobile, and cloud applications. Prepare your network for tomorrow’s unpredictable demands with a powerful ASIC and the programmable HPE Aruba Networking CX Switch Operating System (AOS-CX) to deliver a more consistent, more efficient operator experience. This Layer 2 switch series has convenient built-in high speed uplinks with up to 740W of IEEE 802.3at Class 4 PoE to support IoT devices such as security cameras and wireless APs. A compact and fanless 12 port model is ideal for use in quiet work spaces. With robust QoS, support for static routing, and IPv6, these switches also simplify ownership with no switch software licensing requirements.

What is new supporting point:
Ready for software defined networking with REST APIs.
Silent deployment with compact and fanless 12-port PoE model.
Simplify IT operations with next-gen Layer 2 switch series that provides entry level, reliable, and convenient wired access connectivity.
Flexibility to manage and simplify configurations with HPE Aruba Networking Central, HPE Aruba Networking Switch Multi-Edit Software, easy to use Web GUI, or industry standard CLI.
Right size with 12, 24, and 48 port 1U models with convenient built-in 1/10 GbE uplinks and up to 740W of Class 4 PoE.

Specifications

Management features
Switch layer	L3
Switch type	Managed
Quality of Service (QoS) support	Yes
Multicast support	Yes
Ports & interfaces
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity	0
Installed SFP+ modules quantity	0
Network
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3x
VLAN support	Yes
Spanning tree protocol	Yes
Port mirroring	Yes
Link aggregation	Yes
Flow control support	Yes
10G support	Yes
Data transmission
MAC address table	8192 entries
Switching capacity	176 Gbit/s
Throughput	98.6 Mpps
Latency (1 Gbps)	1.9 µs
Latency (10 Gbps)	1.8 µs
Jumbo frames support	Yes
Packet buffer memory	12.38 MB
Security
Access Control List (ACL)	Yes
DHCP features	DHCP client
Multicast features
Multicast support	Yes
Design
Rack mounting	Yes
Stackable	Yes
Product colour	Black
Form factor	1U
Airflow direction	Side-to-side airflow

Performance
Virtual stacking (units)	16
Processor frequency	1016 MHz
Memory type	DDR3-SDRAM
Internal memory	4096 MB
Flash memory	16 MB
Built-in processor	Yes
Processor model	ARM Cortex-A9
Stackable	Yes
Packet buffer memory	12.38 MB
Harmonized System (HS) code	85176990
Power
Power consumption (max)	44.2 W
Power supply included	Yes
AC input voltage	200 - 240 V
AC input frequency	50 - 60 Hz
Power source	AC
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Yes
Operational conditions
Operating temperature (T-T)	0 - 45 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	15 - 95%
Storage relative humidity (H-H)	15 - 90%
Virtual LAN features
VLAN support	Yes
Weight & dimensions
Width	44 mm
Depth	442 mm
Height	247 mm
Weight	3.4 kg
Technical details
Harmonized System (HS) code	85176990
Logistics data
Harmonized System (HS) code	85176990

You may also be interested in

Compare Products
Product	New HPE Aruba Networking CX 6100 48G 4SFP+... Special Price $6,665.52 Regular Price $10,712.44 Out of stock	NETGEAR M4300-28G PoE+ Managed L2/L3/L... Special Price $4,859.33 Regular Price $7,809.64	Bestseller Cisco IE-1000-8P2S-LM network switch M... Special Price $3,161.40 Regular Price $4,948.27	Popular D-Link 24 Port PoE L3 Stackable Manage... Special Price $3,905.68 Regular Price $6,277.00	D-Link 12-port 10GBASE-T, 2-port SFP+... Special Price $2,975.57 Regular Price $4,657.41 Out of stock	D-Link DGS-3130-54PS Managed L3 Gigabi... Special Price $3,311.14 Regular Price $5,182.65
SKU	JL676A	GSM4328PB-100AJS	IE-1000-8P2S-LM	DGS-3630-28PC	DXS-1210-16TC	DGS-3130-54PS
Manufacturer	HPE	NETGEAR	Cisco	D-LINK	D-LINK	D-LINK
Rack mounting	Y	Y	N/A	Y	Y	Y
Power over Ethernet (PoE)	N	Y	Y	Y	N	Y
Stackable	Y	Y	N/A	Y	N/A	Y
Switch type	Managed	Managed	Managed	Managed	Managed	Managed
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	10G Ethernet (100/1000/10000)	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48	24	8	20	12	48